10
Listening to FM Radio
Checking the Wake Up Time and Alarm Week Mode
Snooze Alarm
When the alarm comes On, press the
SNOOZE
button to
pause it for 9 minutes. Alarm indicator will flash during
Snooze Alarm mode. To turn
off
Snooze Alarm, press either
the
ON/OFF
,
AL1
, or
AL2
button once.
Note:
If not turned
off,
the Snooze Alarm will only be active
for one hour.After Snooze Alarm turned
Off
, the alarm will
come On again same time next day (depends on your Alarm Week Mode
setting).
Activating and Deactivating the Alarm
·
Press the
AL1
or
AL2
button repeatedly to select your desired Alarm
Mode: Wake to Radio, Wake to Buzzer, or
Off
.
·
When the `1♫/2♫' indicator glows, the wake up to Radio alarm will be On.
·
When the `1 /2 ' indicator glows, the wake up to Buzzer alarm will be On.
·
To completely turn
Off
the alarm, press the
AL1
or
AL2
button
repeatedly until the Radio `1♫/2♫' indicator or the Buzzer `1 /2 ' indicator
is
Off.
Selecting the Alarm Week Mode
®
Your SmartSet clock radio allows you to select from three
diff
erent alarm
week modes for each alarm. The Alarm Week Modes are
：
•
Everyday
- the alarm will turn on all 7 days
•
Weekdays only
- the alarm will only turn on Monday
through Friday
•
Weekends only
- the alarm will only turn on Saturday
and Sunday
•
If all 7 indicators are 'On', the Everyday mode is selected.
•
If only the MON (Monday) through FRI (Friday) indicators are
'On', the Weekdays only mode is selected.
•
If only the SAT (Saturday) and SUN (Sunday) indicators are
'On', the Weekends only mode is selected.
Press and hold the
AL1(AL2)
button until the display blinks and shows the
wake up time. Press the
AL1(AL2)
button to resume to clock mode.
•
For better reception, fully extend and adjust the position and direction of the
AC adapter cord that acts as an FM antenna.
•
Press the
ON/OFF
button to turn the unit from Standby mode to On.
•
Press the
MODE
button repeatedly until the
MHz
indicator turns 'On', and
the FM station frequency displays.
•
Set the VOLUME by pressing the
VOL +
or
VOL -
button to a level that suits
your needs.
•
When you finish listening to radio, press the
ON/OFF
button to turn the radio
Off
. The
MHz
indicator will then turn '
Off
'.
Receive your desired station with the TUNING control:
•
Press the
TUNE +
/
TUNE -
button briefly, the receiving
frequency will increase / decrease by one step.
•
Press and hold the
TUNE +
/
TUNE -
button for
3 seconds then release, Auto Station Seeking will be
engaged, the receiving frequency will increase / decrease
automatically until a station with acceptable reception is found.
Storing and Recalling Radio Station Memory Manually
When you have a few favorite radio stations to listen to, you may like to save
them in specific memory locations and pick one of them in a few seconds
without the need of searching it each time. Our digital tuning technology allows
you to do this easily by following the steps listed below:
Storing Station to the Memory
•
Turn the unit On and select Radio mode (
MHz
indicator 'On').
•
Tune in the desired station by the TUNING control as described.
•
Press and hold the
FM STO.
button (for 2 seconds) until 'P XX' blinks,
indicating the memory location to store the station currently tuned in.
•
While 'P XX' is blinking, press the
TUNE +
or
TUNE -
button can change the
memory location from 1 through 20. For example, 'P 03' means the current
listening station is about to be stored into the 3rd location of the memory.
•
After deciding the memory location, press the
FM STO.
button again, the
currently listening station is then stored accordingly.
•
The display will show the frequency of the station, and after a few seconds, it
will restore the current time.
Recalling Station from the Memory
•
Turn the unit On and select Radio mode.
•
Press the
FM MEM.
button, 'P XX' shows on the display, and the station
according to the memory location will then be tuned in.
•
Repeatedly pressing the
FM MEM.
button or the
TUNE +
/
TUNE -
button will
change the memory location from 1 through 20, and the station stored in the
location will then be tuned in once the memory location is selected and all
buttons released.
•
The display will show the frequency of the station, and then returns to the
current time after a few seconds.
Note:
If pairing is unsuccessful, all previously paired Bluetooth devices around
should be disconnected first by pressing and holding the
BT
PAIR
button until it
prompts, or by turning
Off
their Bluetooth connection, in order to avoid making any
auto reconnection between them. Then, set this unit to Bluetooth mode, and tap
the Bluetooth switch on your phone/device
Off
and back
O
n again to refresh/search
any nearby
CKS1521
for pairing.
11
Listening to Bluetooth Speaker
• Press the
ON/OFF
button to turn the unit ON.
• Press the
MODE
button to select Bluetooth (bt)
mode (BT indicator 'Flashes' for pairing)
.
• Enable your Bluetooth device and select
CKS1521
from its Available/Paired device
list. If pairing successful, the unit will prompt
and
BT
indicator will become solid.
• Automatic connection with your Bluetooth
devices is possible if they have been paired
successfully with this unit before.
• After paired, you can play your music
through this Bluetooth Speaker.
• Press briefly the
BT
button can pause or resume playback streaming
over your Bluetooth device.
12
Enjoying Audio Sources via AUX IN Jack
This clock radio is equipped with an AUX IN jack for you to enjoy iPod, MP3 music
player or other audio sources.
•
Connect your iPod, MP3 player or other audio source from its earphone jack to
the AUX IN jack of this unit via an audio cable (not included) with both ends in
3.5mm stereo plug.
•
AUX indicator will light on after you power on the unit and change to AUX mode
by pressing the
MODE
button.
•
Start to play iPod, MP3 music player or other audio player, and set the player
volume to its maximum when necessary.
•
Adjust the volume of this clock radio to meet your desired level as well.
Note:
When alarm time comes, music playing through the AUX IN jack will be
muted, and Wake-To-Music or Wake-To-Buzzer can only be heard according to
your alarm setting.
Sleeping to Music Timer
Press the
ON/OFF
button to turn ON the unit, and press the
MODE
button to
select either FM Radio, Bluetooth or AUX mode to play music or listen to radio.
•
Press the
SLEEP
button. The display will show the sleep timer.
•
Press the
SLEEP
button repeatedly to choose your desired sleep timer
(10-90 minutes or OFF).
Note:
When you change the sleep timer from the 10-minute default timing to
a
different
setting, this new setting becomes the default timing.
•
To display the sleep timer during count down process, press the
SLEEP
button.
•
To cancel the sleep timer during count down process, press the
ON/OFF
button to shut
Off
the unit.
13
14
This clock radio has a USB port at the back, which can provide up to 5V 1.5A
to charge devices like smartphones, tablets, etc., via a USB cable
(not provided).
Note:
Electrical energy drawn from the USB port may vary due to
different
charging cable condition, battery characteristic or power management
system of your device being charged.
15
Press the
DIMMER
button while in standby mode to select any of the three
levels L-3 (high), L-2 (medium) and L-1(low).
To use Automatic Dimmer
function, press the DIMMER button repeatedly until it displays 'AU'
. It
will then automatically adapt clock display brightness based on ambient
lighting conditions to make display appear consistent in
different environments
without the need of pressing the
DIMMER
button manually.
It also can be
adjusted when the Bluetooth, Radio or AUX is On.
Auto Dimmer and 3-Level Dimmer Control
21
fr
CKS1521-20210225-00
CKS1521
2-Level LED Décor
Press the
LED
button to turn the night LED ON(high/low level) or OFF when needed.
16
18
17
The lithium backup battery needs replacement when the LOW BATTERY
indicator flashes, otherwise, the time and alarm settings will be lost/reset
after a power outage.
•
Leave the AC adapter connected to your AC outlet to retain memory while
the original battery is removed.
•
Unscrew the battery holder from the cabinet with a small screwdriver and
insert a new battery with the same CR2032 or equivalent type into the
holder the same way, observing the positive (+) polarity before sliding the
holder back into the slot. The LOW BATTERY indicator should then be
Off
.
polarity facing downward
This device complies with Industry Canada Licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
19
IC Information
Over current protection may occur, such as power shut down, when your
device overdraws extremely high charging current (over 1.5A) from this USB
port. However, such over current protection can be recovered once your
device is disconnected from this USB port or having the loading current
reduced (below 1.5A).
AC Power Supply: AC 120V 60Hz 0.3A max.
Battery Backup: CR2032 Lithium Metal Battery.
Output Power: 1 Wa
tt (4
Ω
Speaker) @10%
THD.
Tuner Range | Preset Stations: FM 87.5~108MHz | 20 stations.
Bluetooth Technology | Range: 5.1 | 32.8 ft (10 m) in free space.
USB Port Charging Output: DC 5V / 1.5A.
Operating Temperature: 32~104
℉
(0~40
℃
).
Dimensions: 6.22"W
x
2.95"D x 3.54"H (158W x 75D x 90H mm).
Specifications are subject to change without notice.
20
Specifications
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
WARNING
