8
ETL Model No.: CF835
5. Installing the Ceiling Cover on the Fan Motor
Housing
(For Close-to-the-Ceiling Mounting)
REMOVE
SCREWS (3)
TOP VIEW
REMOVE 3 MOTOR
HOUSING SCREWS
(every other one)
MOTOR
HOUSING
5.1
Remove Three Motor Housing Screws (every other
one) from the top of the Motor Housing (Figure 6).
Retain the Three Motor Housing Screws for future use.
Figure 6
DECORATIVE CAP
CEILING COVER
Figure 8
5.3
Gently pry the Decorative Cap from the Ceiling Cover
(Figure 8).
REMOVE SCREWS (3)
INSTALL
GASKET
MOTOR HOUSING
GASKET LARGER HOLES (3)
5.2
Position the Rubber Gasket on the Motor Housing,
Small Holes in Gasket centered over the Screw
Holes in the Housing and the Notched Area of the
Rubber Gasket over the Notched Area of the Housing
(Figure 7A & 7B).
NOTE: The three larger holes in the rubber gasket
will fit around the three screws remaining in the
motor housing.
Figure 7A
Figure 7B
