14.
The fan comes with blue, black and white leads that
are 80-inches long. Before installing the fan,
measure up approximately 6 to 9-inches above top
of hanger ball/downrod assembly. Cut off excess
leads and strip back insulation 1/2-inch from end of
leads.
15.
Carefully rotate the partial assembled ceiling fan
and place gently into the styrofoam to compete the
final installation of the fan.
16.
Remove one of the screws from the switch adapter.
Retain for future installation. Loosen the two
remaining screws in the switch adapter for
installation of the lower housing (Figure 8).
17.
Place the lower housing onto the switch adapter.
Rotate the lower housing clockwise on the switch
adapter to engage the keyholes onto the loosened
screws. Retighten the two screws and reinstall the
screw previously removed. Tighten all three screws
securely (Figure 8).
18.
Engage the white wire connector of the light kit
assembly with the white wire connector of the motor
connector (Figure 9). Engage the black wire
connector of the light kit assembly with the black
wire connector of the motor connector. Make sure
the connector latches are closed properly.
19.
Carefully tuck all wires and splices into the light kit
assembly.
NOTE: Do not pinch wires between the lower
housing and the switch adapter.
LOWER
HOUSING
LIGHT KIT
ASSEMBLY
LIGHT KIT
ASSEMBLY
SCREW (3)
Figure 10
7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF766
20.
Remove one of the screws from the lower housing.
Retain for future installation. Loosen the two
remaining screws in the lower housing for
installation of the light kit assembly (Figure 10).
21.
Place the light kit assembly onto the lower housing.
Rotate the light kit assembly clockwise on the lower
housing to engage the keyholes onto the loosened
screws. Retighten the two screws and reinstall the
screw previously removed. Tighten all three screws
securely (Figure 10).
22.
You have now completed the partial assembly of
your new ceiling fan. You can now proceed with
hanging and wiring your fan.
LOWER
HOUSING
SWITCH
ADAPTER
SCREW (3)
SWITCH
ADAPTER
Figure 8
LOWER HOUSING
LIGHT KIT ASSEMBLY
LIGHT KIT ASSEMBLY
BLACK WIRE
LIGHT KIT ASSEMBLY
WHITE WIRE
MOTOR CONNECTOR
WHITE WIRE
MOTOR CONNECTOR
BLACK WIRE
CONNECTOR
Figure 9
3. Ceiling Fan Assembly
(continued)
