Emerson CF712AB02, Руководство пользователя

Страница: 20 / 28

12. Installing the Light Fitter and Glass
(Continued)
LIGHT KIT
ASSEMBLY
BOWL CAP BUSHING
FAN SWITCH
PULL CHAIN
FINIAL NUT
Figure 30
12.10
Remove the finial nut and outer bowl cap from the light
kit assembly (Figure 30).
Pass the fan switch pull chain through the bushing in
the bowl cap (Figure 30).
OUTER BOWL CAP
GLASS BOWL
FINIAL NUT
Figure 31
12.11
Position the glass bowl over the threaded nipple and
seat bowl on bowl cap (Figure 31).
Pass the fan pull chain through the bushing in the outer
bowl cap and install the cap on the threaded nipple.
Install finial nut finger tight.
CAUTION
Be sure that the fan switch chain does not make
contact with the light bulbs. If necessary reposition
the light fitter to avoid the fan switch chain from
touching the light bulbs.
PENDANTS (2)
COUPLINGS (2)
CEILING FAN SPEED
SWITCH PULL CHAIN
LIGHT KIT ASSEMBLY
PULL CHAIN
Figure 32
12.12
Install pendants onto light kit assembly pull chain and
ceiling fan speed switch pull chain using couplings
provided (Figure 32).
NOTE: It is advisable to periodically check the
tightness of the finial.
To avoid possible fire hazard, do not exceed wattage
indicated on the fitter.
WARNING
!
20
U.L. Model No.: 52-ANT