Emerson Avocent 18.5" Local Rack Access LCD Console, Инструкция по установке и эксплуатации

Страница: 11 / 18

Installation .....
7
Removing the LCD tray from the rack
Removing the LCD Tray from the Rack
Number Description
1 LCD tray
2 Inner rail
3 Outer rail
4 Release locking tab
Removing the LCD Tray Descriptions
To remove the LCD tray:
NOTE:
The slide rails have front and rear detents for retention. Be careful not to damage them during
removal.
1. Disconnect the LCD tray from all power and signal connections.
2. Unscrew the thumbscrew to disengage the CMA from the slide rail and prepare the cables for
removal from the rack.
3. Pull the LCD tray out from the rack until the detent engages.
4. When the detent engages, push the tab in along the inner rail and continue to slide the
LCD tray out of the rack.
NOTE:
When removing an LCD tray, make sure you remove and replace all slide rail bracketing in the rack.
The slide rail assemblies should remain with the unit they shipped with.