Emerson AutoSense II Inbound Standalone, Руководство по установке, Страница: 4 / 6

4
Cellular Connectivity
1. Angle antennas away from the wall
2. After power is applied, verify the LEDs to right
of the ethernet port are lit correctly
a. Left LED is a solid GREEN indicating system
is operational
b. Middle LED is solid
GREEN indicating
connection to cellular carrier
c. Right LED is
GREEN or AMBER indicating
cellular strength
System Verification
Stand at the farthest receiving
area/dock door from the
AutoSense Standalone. With the Test
Logger, press and hold the gold power
button in the right-hand corner of the
board until the LED starts flashing
GREEN . LED will flash AMBER when the
test logger has been read.
Test will verify that the system is working
properly. No further action is required.
Power Button
Green Light
Green or Orange
Light Red
Light - No cell
connection