13
Figure 19
UL Model No.: CF930
Your remote control has full control of your
fan and light (Figure 19).
NOTE: Prior to operation of the fan and
light from the remote control, set the
fan speed to HIGH (....) and turn the
light ON ( ).
1.
To set the desired fan speed, hold the
FAN ( ) button down, then press one
of the four buttons (
.
,
..
,
...
,
....
) to
operate your fan from low to high
speeds.
2.
To turn the light on and off, press the
LIGHT ( ) button down, then press
one of the four buttons (
.
,
..
,
...
,
....
) to
operate your light intensity from low to
high intensities.
Note: When turning the light on, light
will turn on at the light intensity
previously selected.
Operation of Remote
Control
HIGH TO LOW
BUTTONS
POWER
INDICATOR
LIGHT
LIGHT
BUTTON
FAN
BUTTON
STORAGE
BRACKET
TO INSTALL
BRACKET TO WALL:
SLIDE THE COVER UP
TO EXPOSE THE
SCREW HOLES FOR
INSTALLATION
COVER
SCREW
HOLES (2)
WALL
BRACKET
IMPORTANT
Fan installation must be completed,
including the installation of the fan
blades, before testing of the remote
control.
AIRFLOW
REVERSING
SWITCH
FAN MOTOR
ASSEMBLY
Figure 20
3.
If airflow is desired in the opposite
direction, turn the fan off and wait for
the blades to stop turning. Then slide
the reversing switch, located on top of
the fan motor assembly, to the opposite
position (Figure 20) and turn the fan on
again. The blades will turn in the
opposite direction and reverse the
airflow.
Installation of Storage
Bracket
A storage bracket is provided for holding
your remote control when not in use
(Figure 19). If you desire to use the
bracket, install it on a wall that is away
from excess heat or humidity.
BP7332-2 CF930 Atomical 9/23/10 3:29 PM Page 13
