Type ACE95jr
July 2020
W8157
Instruction Manual
D102774X012
Type ACE95jr Tank Blanketing Valve
Introduction
▲
WARNING
Failure to follow these instructions or
to properly install and maintain this
equipment could result in an explosion,
fire and/or chemical contamination
causing property damage and personal
injury or death.
Fisher™ Tank blanketing valves must
be installed, operated and maintained
in accordance with federal, state and
local codes, rules and regulations
and Emerson Process Management
Regulator Technologies, Inc.
(Emerson) instructions.
If the valve vents gas or a leak develops
in the system, service to the unit may be
required. Failure to correct trouble could
result in a hazardous condition.
Installation, operation and maintenance
procedures performed by unqualified
personnel may result in improper
adjustment and unsafe operation. Either
condition may result in equipment
damage or personal injury. Use qualified
personnel when installing, operating
and maintaining the Type ACE95jr Tank
Blanketing Valve.
Scope of the Manual
This Instruction Manual provides installation, startup
and maintenance procedures for the Type ACE95jr
tank blanketing valve. See Figure 1.
Figure 1.
Type ACE95jr Tank Blanketing Valve
Product Description
The Type ACE95jr tank blanketing valve is an
extension of the Type ACE95 tank blanketing valve
and is intended to handle lesser flows on gas
blanketing systems. The valve prevents a stored
product from vaporizing into the atmosphere, reduces
product combustibility and prevents oxidation or
contamination of the product by reducing its exposure
to air. The Type ACE95jr maintains a slightly positive
pressure and thereby reduces the possibility of tank
wall collapse during pump out operations.
