Emerson ACC/ARTM-7221/SCSI Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 62

Emerson ACC/ARTM-7221/SCSI Скачать руководство пользователя страница 13

ACC/ARTM-7221/SCSI Installation Guide (6806800F01A)

13

Safety Notes

This section provides safety precautions to follow when installing, operating, and
maintaining the product.

We intend to provide all necessary information to install and handle the product in this
manual. However, as the product is complex and its usage manifold, we do not
guarantee that the given information is complete. If you need additional information, ask
your Emerson representative.

The product has been designed to meet the standard industrial safety requirements. It
must not be used except in its specific area of office telecommunication industry and
industrial control.

Only personnel trained by Emerson persons qualified in electronics or electrical
engineering are authorized to install, remove or maintain the product. The information
given in this manual is meant to complete the knowledge of a specialist and must not be
taken as replacement for qualified personnel.

EMC

The RTM has been tested in a standard Emerson system and found to comply with the
limits for a Class A digital device in this system, pursuant to part 15 of the FCC Rules,
EN 55022 Class A respectively. These limits are designed to provide reasonable
protection against harmful interference when the system is operated in a commercial
environment.

The RTM generates and uses radio frequency energy and, if not installed properly and
used in accordance with this guide, may cause harmful interference to radio
communications. Operating the system in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own
expense.

«
...
11
12
13
14
15
...
»

Содержание ACC/ARTM-7221/SCSI































































Отзывы:

Нет отзывов