background image

1

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury to persons, including the
following:

  1.) Read these instructions.

  2.) Keep these instructions.

  3.) Heed all warnings.

  4.) Follow all instructions.

  5.) Do not use this product near water, for example, near a bath tub, wash bowl,

kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.

  6.) Cleaning. Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

  7.) Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

  8.) Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

  9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.

10.) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

!

C AU T I O N

RISK  OF  ELECTRIC  SHOCK

DO  NOT   OPEN

The lightning flash with arrow-
head  symbol,  within  an  equi-
lateral  triangle  is  intended  to
alert the user to the presence
of  uninsulated ‘dangerous voltage’
within the product’s enclosure
that    may    be    of    sufficient
magnitude to constitute a risk
of  electric  shock  to  persons.

The exclamation point within
an  equilateral triangle  is  in-
tended  to  alert  the  user  to
the  presence  of  important
operating  and  maintenance
(s er vi ci ng)  ins tr uc ti ons  in
the  lit er at ure  accompany-
ing  the  appl ianc e.

WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO  NOT  REMOVE  COVER
( O R   B A C K ) ,   N O   U S E R
SERVICEABLE   PARTS   INSIDE
R E F E R   S E R V I C I N G   T O
Q U A L I F I E D   S E R V I C E
PERSONNEL.

C A U T I O N

CKT9100_090606.p65

6/9/2006, 11:00

1

Содержание CKT9100









































Отзывы: