8
O P E R AT I N G I N S T R U C T I O N S
SETTING THE TIME, THE FIRST TIME
IMPORTANT:
The first time you connect your new SmartSet
®
clock radio to the
AC outlet the internal computer will automatically set the time correctly for the
Eastern Time Zone
, which is the initial default setting. The display will scan for a
few seconds and then show the correct
Day
and
Time
in the Eastern zone. If you
live in the Eastern Time zone, there’s nothing else to do. Your clock is set correctly
and running.
If you do not live in the Eastern Time zone you must change the default zone
display to your own zone. You only do this one time and the SmartSet
®
will remember
the new default zone setting and will always return to that setting after a power
interruption
There are 7 time zones programmed into your SmartSet
®
clock radio as follows:
ZONE 1
—
Atlantic Time
ZONE 2
—
Eastern Time
(Default Setting)
ZONE 3
—
Central Time
ZONE 4
—
Mountain Time
ZONE 5
—
Pacific Time
ZONE 6
—
Yukon Time
ZONE 7
—
Hawaiian Time
To change the default time zone display, depress the
TIME ZONE
button. The
number “2” will appear on the display indicating that the default zone is ZONE 2,
Eastern Time. Hold the
TIME ZONE
button and then press either the
UP
or
DOWN
buttons until your own time zone appears on the display, then release the buttons.
The clock display will change to the correct time in the time zone you selected. The
clock will always return to the correct time in the zone you selected after every
power interruption. If you move to a different time zone, simply change the default
zone display to the new zone and the SmartSet
®
will remember that setting for you.
CKS2023_020504.p65
5/2/2004, 10:52
8
