- 5 -
SI-123338 EN
PARTS IDENTIFICATION
1.
Temperature regulator
2.
Burst of steam button
3.
Spray button
4.
Spray nozzle
5.
Water inlet cover
6.
Indicator light
7.
Steam control knob
8.
Handle
9.
Soleplate
10.
Lock button
11.
Water tank
12.
Self-clean button
13.
Power stand
14.
Power lamp / Auto-shut off lamp
BEFORE INITIAL USAGE
Remove all packaging material. Make sure the appliance is unplugged and the temperature regulator is set at
position “MIN”.
Open the water inlet cover and fill water into the opening up to the max level marked on the water tank. For
this, use the measuring cup. Use the distilled or tap water only. Do not fill in with any other liquid except water.
With first use, there can be slight odour or smoke, but this is harmless and only of short duration. Make sure
there is adequate ventilation.
OPERATION
Before selecting the temperature, read the instruction manual for the iron or the care advice on the tag of the
clothing.
Note: If there is no care advice on the piece of clothing, then you should begin ironing with the lowest
temperature. With lower temperature, there will be less steam.
MIN
●
Nylon
●●
Silk, wool
●●●, MAX
Linen, cotton, highest temperature
Lock button
Cordless mode: Press the lock button (A) from the left to the right position (see lock/unlock printing below) to
unlock the iron. The iron can be rotated 360 degree on the power stand. Then lift it from the power stand. The
iron can be used in cordless mode.
