emerio PAC-125336.3, Руководство пользователя

Страница: 13 / 85

- 12 -
Fig.5
CLEANING AND MAINTENANCE

Before cleaning, be sure to disconnect the appliance from any electric supply outlet.

Do not use gasoline or other chemicals to clean the appliance.

Do not wash the appliance directly.

If the appliance is damaged, please contact the dealer or repair shop.
Air Filters
If the air filters become clogged with dust/dirt, they
should be cleaned once every month.
-
Pull out the air filters by their respective pull tab.
- Clean the air filters with neutral detergent in
lukewarm water (< 40
℃
) and dry them up in
the shade.
- Reinstall the air filters.
Clean the Surface
First clean the surface with a neutral detergent and wet cloth, and then wipe it with a dry cloth.
TROUBLESHOOTING
Troubles Possible Causes Solutions
Not cool enough
in cooling mode
The doors or windows are not closed.
Make sure all the windows and doors
are closed.
There are heat sources inside the room. Remove the heat sources if possible.
The air exhaust hose is not connected or
blocked.
Connect or clean the air exhaust hose.
Temperature setting is too high. Reset the temperature.
Air inlet or outlet is blocked. Clean the air inlet or outlet.
Noisy
The ground is not level or not flat enough.
Place the appliance on a flat, level
surface if possible.
The sound comes from the flowing of the
refrigerant inside the appliance.
It is normal.
Code “E2” on the
digital display
Room temperature sensor failed.
Replace the room temperature sensor.
Contact authorized service technician
for repair.
Code “E3” on the
digital display
Evaporator temperature sensor failed.
Replace evaporator temperature sensor.
Contact authorized service technician
for repair.