- 6 -
OPERATION
Plug in the appliance into an appropriate electrical outlet. Turn on the appliance by pressing the power switch.
A beep sound will be heard. The appliance is standby with the current room temrature illuminating on the digital
display. (Numeral of temperature shows on the side and “
℃
” shows on the top.) Press the on/off button on the
control panel to start setting your heater.
1.
On/off button
Press the button “
” to run your heater in ventilation mode with icon “
” illuminating on digital display.
The digital display shows the room temperature. Press the button “
” again, the appliance will enter into
standby condition. If the appliance is heating, it will count down 30 seconds before turned into standby mode,
in order to cool the inside off and protect the components. The icon “
” will flicker on the display, and one
beep sound will be heard when the appliance finishes the cooling and enters into standby. (If you press into the
ventilation mode during this count-down and then press the button “
” again, the appliance will resume the
count-down unfinished last time before the appliance goes into standby.)
2.
Adjustment button (
“
” or “
”
only on the remote control)
You can press the button “
” or “
” on the remote control to adjust temperature setting. The temperature
range is from 10
℃
to 49
℃
. The set temperature flashes for several seconds and then the display shows again
the room temperature. The heater will automatically stop working when the set temperature is reached and
resume working when the room temperature is lower than the set temperature.
3.
Power setting button
Under working condition, you can press button “
” to switch the power setting between low heating power
and high heating power.
-
Low heating power: Icon “
” will be shown on the digital display.
-
High heating power: Icon “
” will be shown on the digital display.
The heater works on low heating power when the room temperature is 0-2
℃
lower than the set temperature.
The heater works on high heating power when the room temperature is 4-5
℃
lower than the set temperature.
4.
Oscillation button
Under working condition, you can press button “
” to activate or deactivate the swing function. The digital
display will show icon “
” lighted on when swing function is activated.
