emerio FH-110676, Инструкция по эксплуатации

Страница: 6 / 34

- 5 -
FH-110676 / FH-110676.1 / FH-110676.2 EN
PARTS DESCRIPTION
1.
Indicator light
2. Thermostat control switch
3. Heat select switch
4. Air outlet grille
5. Air inlet grille
6. Filter
Heat setting:
“
0 ” position – OFF
“ ” – FAN
I = WARM AIR (low heat output)
II = WARM AIR (high heat output)
THERMOSTAT
1. Rotate the switch to choose the suitable setting (“ ”= fan only, no heat/ “I”= low heat output/ ”II”= high
heat output).
2. Turn the thermostat knob in a clockwise direction to the max position.
3. Once the room temperature has reached the desired value, turn the thermostat knob slowly in
anti-clockwise direction until you hear a "click" sound; this is the setting temperature.
4. The appliance will automatically maintain the setting temperature. It will switch on when the room
temperature is below the setting, and switch off if it is above the setting.
SAFETY SYSTEM

The appliance has a safety system which automatically switches off the unit when overheated. If
overheating occurs, the heating element switches itself off automatically. Once the appliance has cooled
itself down, the heating element switches back on automatically.
Warning: Make sure the appliance is in a good ventilation condition before reuse. If the overheating
protection triggers a second time, you must return the appliance to the shop for repair.

This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically
switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.
MAINTENANCE

Before you clean the unit, turn off the switch. Remove the plug from the socket and wait until the fan
heater cools down completely.

Use a damp cloth to wipe the heater housing and use a vacuum cleaner or a dusting brush to clean the air
inlet grille and outlet grille.

There is a filter behind the air inlet grille. Remove the air inlet grille and take out the filter. Clean them
under the running water. After cleaning, dry the grille and filter thoroughly and then put them back to
original position.

Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the
appliance.