Dragon X750 User Manual V 1.0
©2018 Emerging Technology Ventures | www.etvamerica.com
7
Powering On / OFF
NOTE
: Always turn on the Walkera controller and GCS tablet and allow it
to boot up before powering on the Dragon X750
NOTE
: Always power off the Dragon X750 before turning off the
Walkera controller and GCS tablet.
To Power On
: Place the Dragon X750 on a level and stable surface then
power on the Walkera DEVO F12E Controller by placing the Power
Switch in the up position, and power on the GCS Tablet. Plug the
Dragon X750’s battery into the socket, the aircraft will emit two
beeps, followed by three more beeps. DO NOT TOUCH OR MOVE
THE DRAGON X750 UNTIL THE INITIALIZATION PROCESS IS
COMPLETE. The gimbal camera will spin to the front position.
To Power Off
: Ensure the propellers are not spinning. DO NOT TOUCH
OR MOVE THE DRAGON X750 UNTIL THE MOTORS HAVE
STOPPED MOVING COMPLETELY. Unplug the Dragon X750’s
battery, this will power down the aircraft. Power off the Walkera
DEVO F12E Controller by placing the Power Switch in the down
position, and power off the GCS Tablet.
Figure 5- Showing the location of how to power the different devices