Not
e
:
1.
Please make sure the key is NOT in the ignition or on ACC mode when starting the installation process.
2.
Please make sure this
interface
matches
your car model using the compatibility chart.
LVDS at the rear of COMAND unit
interface LVDS
CAN&POWER
(
40 way Interface Quadlock)
40 way Quadlock connector
Original Quadlock
to Interface
Interface Quadlock
1.
Using trim removing tools, remove
the main radio command system as
shown above. (Position depends on
the car model)
2.
Plug the OEM LVDS cable to the
designated LVDS IN of the interface
module. (OEM LVDS shown in
picture 3)
4.
Using the provided Quadlock cable,
unplug the OEM, connect it to the
female end of the supplied Quadlock
and insert the new Quadlock into the
OEM port.
Above is the supplied Quadlock
plugged into the OEM port.
5. Connect the AV harness into the
module.
6. Connect a rear camera to the
REAR CAM IN and front camera to
FRONT CAM
VIDEO IN (Front
Camera s
old
Separately
)
7. With the unit powered up, we can
now turn on the vehicle and place it
in reverse to test. Please note, it's
always best to test out the camera
committing to
angle before fully
mounting it.
Mercedes-Benz Interface Module Installation
- Part 2
3. Using the provided LVDS cable,
connect the module to the OEM screen to
close off the loop. (Green of Black LVDS)
