DIGITAL CODE:
All ALERT2 Transmitters and Receivers use an 8-bit digital code. The code is factory set with one code for
each ALERT2 customer to prevent interference between customers. You can change your code if desired by
changing the 8-bit switches on the rear of the Receiver, and on the circuit board inside the Transmitter. If you
choose to change the code, please contact Emerald Marine Products and provide us with your new code.
ALERT2 PRODUCTS PARTS AND WARRANTY
The ALERT2 Products come with a 3-year product warranty on parts and labor.
It is highly advised to test the ALERT2 products monthly. To sign-up for testing reminder emails, email
[email protected] or call 206-965-8207.
For additional information about the ALERT2 Man Overboard Alarm System, including information on the
ALERT2 Portable Direction Finder and OSCAR: Man Overboard Training Dummy™, contact us at the address
and website listed below.
Emerald Marine Products
6206 1
st
AVE NW
Seattle, WA 98107
206-965-8207
www.alert2.com
Manufacturer of the ALERT2 Man-Overboard Alarm System
When placing circuit board into ALERT2 shell, make
sure green LED on circuit board is facing opposite
side of black boot that is on outside of shell.
It is easiest to place the batteries into the shell at the
same time. With black boot facing you, have positive
battery on top and negative battery on bottom.
