DESCRIPTION
The unit is a photoelectric 220~240V AC, with 3V DC battery back-up smoke alarm device. It is particularly
sensitive for detecting visible micro-particles (associated with smoldering fires) and reacts faster than
ionization alarms.
An example of such smoldering fires is a cigarette burning in a couch or bedding a common cause
of devastating blazes.
Please note this device does not detect flames, heat, carbon monoxide or other hazardous gases.
It has many advanced features and an extended operational life with the included battery.
To enable interconnection with other Emerald RF smoke alarms add an RF module (EP-HYB-RF-MOD).
MODEL NUMBER: EP-HYB-240-10
Thank you for choosing Emerald Alarms.
This leaflet contains important information on the correct
installation and operation of your smoke alarm.
Please read all the information before commencing
installation and retain for future reference.
This unit has been designed to meet the latest safety
standards demanded in Australia and complies with the
requirements of AS3786:2014.
POWER:
220~240V AC 50-60Hz with 3V battery backup (non-replaceable battery)
OPERATION CURRENT:
<80mA
BATTERY LIFETIME:
10 years
ALARM VOLUME:
>85dB (A) at 3 meters
ALARM SENSITIVITY:
0.1-0.16dB/m
HUSH/SILENCE TIME:
approx. 8 minutes
INTERCONNECTION:
up to 24 smoke alarm/s, hardwired
COMPLY WITH:
AS3786: 2014
SOUND PATTERN:
ISO8201 (Bl 0.5s - pause 0.5s - Bl 0.5s - pause 0.5s - Bl 0.5s - pause 1.5s,
with the red LED flash, repeat this alarm pattern
WIRELESS INTERCONNECTION
Bl - Bl - pause 0.5s, Bl - Bl - pause 0.5s, Bl - Bl - pause 1.5s,
ALARM SOUND PATTERN:
without the red LED flash, repeat this alarm pattern
SMOKE ALARM
USER MANUAL
