18
SVR-D2U-R710 Installation and Replacement Guide
Replacing the server chassis
Removing the server from the cabinet
To remove the server from the cabinet:
1. Remove all power, Ethernet, and Fibre Channel cables from the
back of the server. Label the cables so they can be easily identified
when they are connected to the replacement server.
2. Remove the bezel as shown in
Figure 12
Removing a front bezel
Note:
Bezels are application-specific, and may not appear as shown. All
bezels include a key entry. Most include two tabs at either side that you press
toward the center to release the bezel from its latches.
CL4391
1
1
