Figure 11 Bracket assembly adapter screws and orientation marking
1. Adapter screws.
2. “L” for left side.
l
Gap filler (2)
Figure 12 Gap filler
l
Assorted screws.
l
One multipurpose screwdriver.
Install the brackets onto the rack
Before you begin
Note
l
Do not hold the bracket assembly in a vertical position as the parts may separate.
l
The Data Domain system is two rack units (RU) tall. Make sure the location in the rack
fits the product.
Procedure
1. If your rack contains round unthreaded or square holes, skip to the next step. If your
rack contains threaded holes, unscrew and remove the screw caps at both ends of
each bracket.
EMC Data Domain DD2500 System Installation and Setup Guide
Install the brackets onto the rack
13
