EMC VPLEX, Инструкция по установке и настройке

Страница: 35 / 94

Setting up a VPLEX Local implementation 35
Setting up VPLEX
Figure 22
PuTTY configuration: SSH protocol
14. For most of the setup tasks, you can leave your laptop connected directly to the
management server, or you can move to a more-comfortable location and
reconnect to the management server over the customer network:
• If you are going to move your connection (as described later), go to step 15 .
• If you are going to remain connected directly for the entire setup procedure,
read the following information, and then perform any desired steps:
– The output from some commands you will type is too long to read in a
standard-size PuTTY session window. One solution is to extend the
scrolling capability. To do this, select
Window in the Category list, and set
Lines of scrollback (shown in Figure 23 ) to 20000 .
Figure 23 PuTTY configuration: Scrollback setting
SSH protocol
version
p u tty_ssh
scrollback
Set to 20000