EMC VNX5300 Block Скачать руководство пользователя страница 45

Страница: 45 / 88

I/O modules

EMC® VNX5300™ Hardware Information Guide

Two-port 10-Gb/s optical or active Twinax iSCSI I/O module

The two-port 10-Gb/s optical or active Twinax

iSCSI I/O module comes with two

optical or active twisted pair ports, one power/fault LED, and a link and activity LED
for each port (

Figure 44

). The optical ports on this I/O module can interface at speeds

of 10 Gb/s for iSCSI (Internet Small Computer System Interface) networks

. The

two-port 10-Gb/s optical I/O module uses the SFP+ transceiver module (see the
section describing the SFP+

“Four-port 8-Gb/s FC I/O module” on page 41

for more

information about the SFP+ modules). The two-port 10-Gb/s optical I/O module
uses iSCSI protocol, hence the required SFP+ transceiver module (for part number,
see the

VNX5300 Parts Guide

Figure 44

Two-port 10-Gb/s optical I/O module

10. The two-port 10-Gb/s I/O module can also use active twinaxial (Twinax) cables. Twinax is a

type of cable similar to coax, but with two inner conductors instead of one. These cables will
be supplied in lieu of the SFP+ when so ordered.

11. iSCSI is a protocol for sending SCSI packets over TCP/IP networks.

Push button latch handle

SFP+ link LED (right)

Power/fault LED

SFP+ NIC activity LED (left)

SFP+ (optical) port (two)

CNS-001756

Содержание VNX5300 Block

























































































Результаты поиска

Содержание VNX5300 Block

Отзывы:

EMC VNX5300 Block, Руководство по аппаратным средствам, Страница: 45 / 88

Результаты поиска

Содержание VNX5300 Block

Отзывы: