EMC VNX5300 Block Скачать руководство пользователя страница 15

Страница: 15 / 88

System component description

EMC® VNX5300™ Hardware Information Guide

DME front view

The front of the Block and File VNX5300 platform, the DME contains two enclosure
status (power and fault) LEDs (

Figure 8

Table 6

describes the DME power and fault

LEDs.

Note:

Figure 8

is a graphical representation of the Block and File VNX5300 platform DME with

four power supply/cooling (fan) modules and two CPU modules installed.

Figure 8

Data Mover enclosure LEDs

CPU LEDs

The CPU modules in the DME contain the power, fault, and unsafe-to-remove LEDs.

Figure 9

shows the CPU LEDs and

Table 7 on page 16

describes them.

Figure 9

CPU LEDs

Data Mover Enclosure

fault LED

Data Mover Enclosure

power LED

CNS-001667

Table 6

Data Mover Enclosure LEDs

LED

Color

State

Description

Power

Blue

DME is powered up and all the FRUs in the enclosure are operating
properly

—

Off

DME is powered down.

Fault

Amber

A FRU failed within the enclosure.

—

Off

DME operating normally.

CPU power LED

CPU fault LED

CPU unsafe to

remove LED

CNS-001669

Содержание VNX5300 Block

























































































Результаты поиска

Содержание VNX5300 Block

Отзывы:

EMC VNX5300 Block, Руководство по аппаратным средствам, Страница: 15 / 88

Результаты поиска

Содержание VNX5300 Block

Отзывы: