EMC SVR-I2U-R2312, Руководство по установке и обслуживанию

Страница: 7 / 34

Removing inner rails from the rail assemblies
Perform the procedure that follows on each rail assembly. Refer to Figure 2 on page 7
while performing the procedure.
Procedure
1. Slide the inner rail out from the slide rail as far as possible.
2. On the inner rail, slide the blue disconnect tab forward to release the inner rail from
the slide rail.
3. Slide the inner rail completely out of the slide rail.
Figure 2 Removing the inner rail from the slide rail
CL4883
3
1 2
Attaching the inner rails to the server
Refer to Figure 3 on page 8 while using the procedure that follows to attach an inner
rail to each side of the server.
Procedure
1. With the flat side of the inner rail facing the side of the server, align the large end of
the rail notches of the inner rail with the connection studs on the server and push the
inner rail onto the connection studs.
2. Slide the inner rail forward along the server until the studs fit securely into the small
end of the rail notches.
An audible click indicates that the rail is secure.
Removing inner rails from the rail assemblies
7