EMC CLARiiON, Руководство по установке

Страница: 83 / 102

Removing the Navisphere Server Utility
A-25
Silent Installations and Removals
-s
Indicates a silent removal. A silent removal requires no user
input after you enter the command.
-f1 fullpath\responsefilename
Specifies the full pathname of the response file created in step
5 on page A-24.
-f2 fullpath\logfilename
Specifies the full pathname and filename of the log file.
Example:
RunDll32
C:\PROGRA~1\COMMON~1\INSTAL~1\engine\6\INTEL3
~1\ctor.dll,LaunchSetup "C:\Program Files\InstallShield
Installation
Information\{5089BD3A-00C2-11D4-9A6C-0060B0FB53A4}\set
up.exe" -STARTEDFROMADDREMOVEPROGRAMS -s
-f1E:\aSafeDir\serverutilUninst.iss
-f2C:\aLocalSafeDir\serverutilUninst.log
where -s specifies a silent operation will be performed, in this
case a removal, using the response file recorded in
E:\aSafeDir\serverutilUninst.iss
. It will then log the result in
-f2C:\aLocalSafeDir\serverutilUninst.log .
3. Verify that the removal was successful (refer to the next section,
Verifying the silent installation or removal ) before running the
command on all the other attached Windows servers.
4. If the removal was successful, repeat steps 1 and 2 on page A-24
on all remaining attached Windows servers.