EMBRON HATTELAND TECHNOLOGY HD 43T22 MVD-MA C Series, Руководство пользователя

Страница: 31 / 96

Physical Connections
31
IND100133-71
RS-422 / RS-485 COM I/O:
The COM (non-isolated RS-422/485) allows functionality to communicate with serial based equipment including
external buzzer functionality. Connect and fasten your cables from your compatible external equipment to the 5-pin
Terminal Block 3.81 connector. Please review the “Pinout Assignments” chapter as well as “Housing / Terminal Block
Connector Overview” in this manual for more information. One example of peripherals from Hatteland Technology is
the External Remote Controller (HD REM SX1-A1). This connector will allow remote control of the display unit to
control common functions like brightness, input source and more via the Serial Remote Control (SCOM) as provided
by Hatteland Technology.
Hatteland Technology’s Serial Remote Control Interface (SCOM) protocol document can be downloaded from:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-6.htm
USER PORT (Potentiometer I/O):
Allows for controlling Brightness of the displayed image on screen by connecting an external remote control to the
D-SUB 9P connector (male) which has Potentiometer Analog Input, User Brightness (BRT), I2C and +5VDC & 12VDC
OUT functionality built in. Review the “Pin Assignments” chapter in this manual for more information on how to
activate this functionality. Note: Do not connect/disconnect cables to this connector while product is powered on.
RS-232 SCOM I/O:
This D-SUB 9P connector (female) provides additional functionality for the unit. The Serial Remote Control (SCOM)
features a RS-232 (non-isolated) interface for controlling internal parameters like brightness. You can access most of
the parameters available in the OSD menu and with special commands control the unit externally. This COM can also
be used to upgrade the firmware for the graphic controller inside the unit which is available on request and through
service channels (for qualified personnel only). Fasten your external cable to the connector using the provided screws
on the cable housing.
Please review “Management Settings/Communication” in the “OSD Menu Functions” chapter for more information.
Hatteland Technology’s Serial Remote Control Interface (SCOM) protocol document can be downloaded from:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-6.htm
SCOM Network/LAN I/O:
Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable
connector ”clicks” into the RJ-45 connector. This connector will allow remote control of the display unit to control
common functions like brightness, input source and more via the Serial Remote Control (SCOM) as provided by
Hatteland Technology.
Hatteland Technology’s Serial Remote Control Interface (SCOM) protocol document can be downloaded from:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-6.htm