Embrace™ Nest Operation Manual (0602-50001-002)
Page 29
CAUTION
It is not advisable to open the AccuTemp™ Heater lid during the heating cycle, as the heating surface
gets very hot while heating up the WarmPak™.
If the user opens the lid without pressing the Start/Stop button, then the AccuTemp™ Heater will
automatically turn off the heating cycle, and give off a continuous high pitched warning beep. This is
to warn the user that the heating surface may be very hot to touch, and can cause burns, should the
user accidentally touch the heating surface in the process of retrieving the WarmPak™. The alarm
will sound even if the user presses the Start/Stop button before opening the lid, as the heating plate
will still be hot and pose a burn risk to the user.
Removing the heated WarmPak™ from the AccuTemp™ Heater
10.
The “WARMPAK™ READY” indicator will remain illuminated (green) until the lid is lifted or the
Start/Stop button is pressed. This indicates that the AccuTemp™ Heater is maintaining the
WarmPak™ at the operating temperature.
11.
Open the lid and remove the heated WarmPak™ when ready to use.
Ever-ready mode: Keeping the WarmPak™ warm in the AccuTemp™ Heater
After approximately 35 minutes, when the heating cycle is complete, the WarmPak™ will be at the
operating temperature and ready to use. However, as long as the user does not press the Start/Stop
button or lift the lid the AccuTemp™ Heater will continue to maintain the WarmPak™ at the
operating temperature, until the user needs to use the WarmPak™.
This allows the user to place a WarmPak™ in the AccuTemp™ Heater and heat it up well in
advance rather than planning to heat it right before the WarmPak™ is needed.
It is recommended to leave the WarmPak™ in the AccuTemp™ Heater until it needs to be used as
the ever-ready mode has very low power consumption.
