Connection Method 1: Corner Hub & End Cap
Connection Method 2: Middle Hub & Middle Cap
Connection Method 3: Silicon Edge Graphics
The scissor frames will have this corner hub installed on all four corners, front and back of the frame.
This corner hub takes the end caps of the channel bars. The end caps of the channel bar will snap
into place.
The scissor frames will have middle hubs with a metal prong installed on all four sides front and left
and right sides of back. Attach the middle caps of the channel bars onto the middle hubs. The middle
caps of the channel bar will snap into place.
To apply the silicone edge graphic, start by pressing the SEG into the top left corner hub of the frame.
Continue to press the SEG into the extrusion bar fabric channel. Keep pressing the SEG into the bar
fabric channel until you make down to the bottom right corner hub of the frame. This also works for
the second printed graphic option on the back side of the frame when horizontal channel bars are
installed.
Connection Methods & Notes
As an optional feature, the front printed graphic may have end cap graphics with silicone edge. Pull
the end cap silicone edge to the top of the back corner hub. Start to press in the SEG into the hub
and work your way down the side channel. Do the same for the opposite end cap.