EMBLEM EASYLAM 140 C, Руководство по эксплуатации

Страница: 11 / 16

Mounting on rigid boards with EASYLAM
There are different technics professional users execute. First you have to face two requirements:
a)
Mounting a print on a self adhesive board
b) Mounting a self adhesive print on board
General:
Open the gap between the axles at that high of the board.
Adjust the high of the supply plate to the high of the board.
Move the board between the axles and close the gap by “FILM”-key.
Remove the board outside by using “REVERSE” – key.
Now the gap is adjusted.
For requirement a) Mounting a print on a self adhesive board
Pull of 3-4 cm of the liner of the adhesive board and stick the print to the board manually.
Move the board between the axles and place print on top of the upper axle like shown in graphic I.
Start mounting by some push of the board to move between the axles and push “start”- key.
Move away liner manually during mounting process.
- 11 -