6 Adding the VCB to an Ad-hoc Permission Group
36
Emblaze-VCON VCB5 User’s Guide
Setting the Usage Order
The services' locations in the list determines the order in which the MXM tries to use
them. After an end point invites another end point, the MXM first tries to use the
first service defined in the permission group. If the first service is not available, it
tries to use the second defined service, and so on. If all enabled services are
unavailable, the MXM does not complete the "invitation" to the additional end
point.
In the Permission Group page, you can move the services to different places in the
usage order.
³
To set the usage order of the selected services
T
Click the name (
not
the checkbox) of a selected service. To move the service
up and down the list to its designated place, click
Move Up
or
Move Down
as many times as necessary.
Repeat this step for as many services as necessary.
