Your Smart Sensor is equipped with a unique feature which enables
you to reduce the brightness of the Bluetooth® Smart Sensor ‘flash’
and to reduce the length of flashing when your equipment is no
longer being used.
Your device is shipped with the brightness level set to maximum,
however you may wish to enable BedroomMode
™
to reduce the
brightness of the Bluetooth® Smart Sensor light in a bedroom.
BedroomMode
™
is not recommended for living rooms or brightly
lit areas.
These settings can easily be changed by using the emberconnect™ app.
To Set using the Bluetooth® Smart Sensor:
Make sure that at least your TV is switched on before starting.
1.
Press and hold the
SET
button on the Bluetooth® Smart Sensor for
3 seconds then release. The LED light on the front of the sensor will
flash, starting from a faint flash slowly progressing to a bright flash.
2.
When you are happy with the level of brightness, press the
SET
button on the Bluetooth® Smart Sensor again.
3.
You can change the brightness of the Bluetooth® Smart Sensor at
any time by following the above steps.
NOTE:
Once BedroomMode™ is selected, the LED will flash for
about 10 seconds when you turn off your television before the
power is removed from the Power Saving sockets.
If you prefer the LED to flash for one minute, press the MUSIC
button instead of the SET button at step 2.
BedroomMode™ settings
13
