Embedian, Inc.
41
SBC-SMART-MEN User’s Manual Document Revision v.1.0
3.1.3.6. Power Input 2-pin 4.2mm mini fit male 180D Connector: 5V
The power input connector of
SBC-SMART-MEN
is using a 2-pin 4.2mm
locking ramp Molex 39-28-1023 or compatible connectors. The input
power shall be 5V.
The following table shows the pin-out of the power input connector.
5V: Location on Board, B4
Power Input Connector:
2-pin screw type terminal block
Edge
Finger
Sitara AM335x CPU
Type
Header
Pin
Signal Name
Function
Pin#
Ball
Mode
Signal
Name
1
5V
5V
Input
P
2
GND
Ground
Power
P
3.1.3.7. SMARC Module
MXM3
Connector: SMARC
The SMARC Module is supported on SMARC connector. This is a 314 pin
MXM3 style connector. The SMARC pin-out conforms to the SMARC
Module specification. Only 3.3V Module I/O can be supported on the
SBC-SMART-MEN
single board computer.
The MXM3 style connector used on the
SBC-SMART-MEN
single board
computer is with a board-to-board spacing of 5mm.
The
SBC-SMART-MEN
carrier board has captive M2.5 threaded standoffs
in the SMARC mounting hole positions. The standoffs accept M2.5 screws,
inserted from above, through the Module holes.
3.1.3.8. RTC Backup Battery: CN3
A 6.8mm diameter 3V lithium coin cell battery is available in position CN3.
The part number of coin cell battery on CN3 is
Seiko MS621F_FL11E
.
