Embedded NVR 16CH, Руководство пользователя, Страница: 12 / 52

Chapter3 Installation Description
3.1 Check Device and Accessories
When you receive our product, please refer to “container list” that comes with packing box to
check device and accessories.
3.2 Hard Drive Installation
Factory without provide HDD, first installation must install hard drive first, suggesting using
company recommended hard drive model and not recommend using PC dedicated hard drive.
4CH maximum supports 1 HDD, 9CH supports 2 HDD, 16CH supports 8*80G or upper
capacity HDD and an external eSATA HDD, installation quantity as needed, user can choose hard
drive quantity according to hard drive capacity, record time and video quality.
3.2.1 4CH/9CH Product Hard Drive Installation
1. Take apart host rear panel and side panel’s fixed screws;
2. Reversal host, insert hard drive in correct position;
3. Fixed hard drive in rear panel by four screws;
4. Connect up hard drive line and power supply line;
5. Close chassis cover;
6. Fixed host rear panel and side panel’s screws.
3.2.2 16CH Product Hard Drive Installation
1. Take apart fixed screws in host upper cover and open chassis upper cover;
2. Disassemble hard drive bracket and host rear panel’s fixed screws, take out hard drive bracket
from host;
3. Hard drive bracket has up and down level, first install lower level then install upper level;
4. Fixed hard drive in hard drive bracket;
5. Fixed hard drive bracket;
6. Plug hard drive data line and take its opposite end to SATA socket;
7. Plug power supply line for every hard drive;
8. Close chassis cover, fixed chassis screws;
Note: If want to replace hard drive, please power off NVR then open chassis to
replace hard drive.