Embedded Computer EPC-5500 Pentium M, Руководство по эксплуатации

Страница: 59 / 92

Chapter 4 Award BIOS Setup
EPC-5500 USER
′
S MANUAL
Page: 4-11
4-5. ADVANCED CHIPSET FEATURES
Choose the
〝
ADVANCED CHIPSET FEATURES
〞
from the main menu,
the screen shown as below.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
Item Help
DRAM Timing Selectable
X CAS Latency Time
X Active to Precharge Delay
X DRAM RAS# to CAS# Delay
X DRAM RAS# Precharge
DRAM Data Integrity Mode
System BIOS Cacheable
Video BIOS Cacheable
Memory Hole At 15M-16M
Delayed Transaction
AGP Aperture Size (MB)
** On-Chip VGA Setting **
On-Chip VGA
On-Chip Frame Buffer Size
Boot Display
Panel Type
PCI SERR# NMI
[By SPD]
2.5
7
3
3
Non-ECC
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[64]
[Enabled]
[32MB]
[CRT]
[640x480 18-bits]
[Disabled]
Menu Level ►
↑↓→←
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
Chipset Features Setup Screen
This parameter allows you to configure the system based on the specific
features of the installed chipset. The chipset manages bus speed and
access to system memory resources, such as DRAM and the external cache.
It also coordinates communications between conventional ISA bus and the
PCI bus. It must be stated that these items should never need to be altered.
The default settings have been chosen because they provide the best opera-
ting conditions for the system. The only time you might consider making
any changes would be if you discovered that data was being lost while
using your system.