LPC3152 Developers Kit - User’s Guide
Page 30
Copyright 2012 © Embedded Artists AB
The new COM port (USB Serial Port) will be listed under the
Ports
list. Right-click on the new USB
Serial Port and select
Properties
, as illustrated in
Figure 11
below.
Figure 11 – Device Manager Port Dialog
Select 115200 bits per second, 8 data bits, none parity, 1 stop bit, and none flow control, as illustrated
in
Figure 12
below. Then select
Advanced
settings. Please note that different application programs can
use different baudrate settings for the serial channel. Other baudrates can also be used, depending on
your specific application.
Also note that it is normally not needed to set the used baudrate at all. The driver and FT232R chip will
automatically handle different baudrates. The setting is only shown here for completeness.
Figure 12 – USB Serial Port Properties Dialog
UART settings
Advanced
settings
USB Serial Port
Properties
