background image

iMX RT1176 uCOM Developer’s Kit - User’s Guide

 

Page 15 

 

 

 

Copyright 2021 © Embedded Artists AB 

 

 

Disclaimers 

Embedded Artists reserves the right to make changes to information published in this document, 

including, without limitation, specifications and product descriptions, at any time and without notice. 

This document supersedes and replaces all information supplied prior to the publication hereof. 
Customer is responsible for the design and operation of their applications and products using 

Embedded Artists’ products, and Embedded Artists accepts no liability for any assistance with 

applications or customer product design. It is customer’s sole responsibility to determine whether the 
Embedded Artists’ product is suitable and fit for the customer’s applications and products planned, as 

well as for the planned application and use of customer’s third party customer(s). Customers should 

provide appropriate design and operating safeguards to minimize the risks associated with their 

applications and products. Customer is required to have expertise in electrical engineering and 

computer engineering for the installation and use of Embedded Artists’ products. 
Embedded Artists does not accept any liability related to any default, damage, costs or problem which 

is based on any weakness or default in the customer’s applications or products, or the application or 

use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for 

the customer’s applications and products using Embedded Artists’ products in order to avoid a default 

of the applications and the products or of the application or use by customer’s third party customer(s). 
Embedded Artists does not accept any liability in this respect. 
Embedded Artists does not accept any liability for errata on individual components. Customer is 

responsible to make sure all errata published by the manufacturer of each component are taken note 

of. The manufacturer's advice should be followed. 
Embedded Artists does not accept any liability and no warranty is given for any unexpected software 

behavior due to deficient components. 
Customer is required to take note of manufacturer's specification of used components, for example 

MCU, SDRAM and FLASH. Such specifications, if applicable, contains additional information that must 

be taken note of for the safe and reliable operation. These documents are stored on Embedded Artists' 

product support page. 
All Embedded Artists’ products are sold pursuant to Embedded Artists’ terms and conditions of sale: 

http://www.embeddedartists.com/sites/default/files/docs/General_Terms_and_Conditions.pdf

 

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted 

under this document. If any part of this document refers to any third party products or services it shall 

not be deemed a license grant by Embedded Artists for the use of such third party products or 

services, or any intellectual property contained therein or considered as a warranty covering the use in 

any manner whatsoever of such third party products or services or any intellectual property contained 
therein. 
UNLESS OTHERWISE SET FORTH IN EMBEDDED ARTISTS’ TERMS AND CONDITIONS OF SALE 

EMBEDDED ARTISTS DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO 

THE USE AND/OR SALE OF EMBEDDED ARTISTS PRODUCTS INCLUDING WITHOUT 

LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 
PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR 

INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. 
UNLESS EXPRESSLY APPROVED IN WRITING BY THE CEO OF EMBEDDED ARTISTS, 

PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, 

AIR CRAFT, SPACE, NUCLEAR, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN 

PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL 
INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. 
Resale of Embedded Artists’ products with provisions different from the statements and/or technical 

features set forth in this document shall immediately void any warranty granted by Embedded Artists 

Содержание iMX RT1176

















Отзывы: