iMX RT1176 uCOM Developer’s Kit - User’s Guide
Page 6
Copyright 2021 © Embedded Artists AB
Figure 1 – iMX RT1176 uCOM Developer's Kit
1.
ON/OFF switch (instead of having to plug in/out the 12V power supply barrel connector).
2.
12V power supply input, 12V/3A DC, via a 2.1mm power jack. The center position is the
positive terminal.
3.
USB OTG connector - this USB interface can, together with a PC application, be used to
program the flash memory of the
iMX RT1176 uCOM board
.
4.
UART-to-USB bridge - this gives access to the console UART of the i.MX RT1176 MCU.
5.
ISP Enable push-button (and jumper, left of button) - pressing this button (or shorting jumper)
while the board power up will place the i.MX RT1176 is ISP mode (typically used for
programming the
iMX RT1176 uCOM board
flash memory).
6.
Reset push-button - a press will generate a power cycle (in default behavior).
Figure 9 in chapter 3 gives a slightly more detailed presentation of all interfaces and connectors on the
board.
4
2
6
3
5
1
