Helpful User Tips
Clearing a Jam
If paper is not inserted properly into the shredder, or if the sheet capacity is
exceeded, a jam may result. Move the switch to the REVERSE (<<) position, and
remove the excess paper from the top and pull it out. TO PREVENT ANY INJURIES,
DO NOT PLACE YOUR HANDS NEAR THE FEED OPENING. Once the paper is
cleared, normal shredding operation can resume. If the shredder jams while in
reverse, press the switch to the AUTO position and let shredder run to clear the
jammed paper. If jam does not clear, slide the switch back and forth between the
REV and AUTO until the jam is cleared. If the jam cannot be cleared following this
procedure, unplug the unit and carefully remove the jammed paper manually.
Overheating
If your shredder overheats, the unit will automatically shut off and all functions
will cease in order to protect the motor. Turn off and unplug the shredder from
the outlet. Allow enough time for the motor to cool down. The shredder will not
resume normal function until the temperature of the motor cools down to a safe
temperature. Once cool, plug the shredder back into the outlet, turn the unit
back on and resume normal operation. Make sure to empty waste basket to avoid
overloading the basket and damaging the cutting mechanism.
Bin Full Function
Some shredders are equipped with a mechanical or optical Bin Full sensor.
When the basket becomes full, the shredder will cease operation. Empty basket
to resume operation.
Emptying Basket
Always turn the shredder off and unplug the power cord from the AC outlet before
cleaning it, moving it, or emptying the wastebasket. Always keep wastebasket
emptied so that the shredder’s output is not impeded. Never let the wastebasket
get full. This will lead to shredded material being pulled back up into the shredder
and cause jams.
Staples and Paperclips
Although our shredders are safe to shred the occasional standard staple, you
should remove them if possible. Also, industrial or non-standard, large size
staples must be removed. Paperclips should not be shredded at any time, as they
significantly reduce the life of the shredder. Please remove staples and paperclips
from paper before shredding.
