E
MAX YIN YAN MODEL TECH.MFT.
F. Programming via program card
F.1 Programming the ESC
1
．
Disconnect the ESC from the battery
2
．
Pull the PPM signal wire out from the receiver, and plug it into
the program card jack. Please pay attention to the direction
3
．
Connect the ESC to the battery (the first row of LED
on the program card will flash)
4
．
The program card automatically reads parameters
from the ESC and the corresponding LED will be on.
5
．
All parameters can be viewed and modified by pressing corresponding
buttons.
6
．
Press the “
Write
” button to write the new parameters to the
ESC
7
．
Cut off the power
F.2 Functions of each button
Button
：
Choose different parameters (7 in total). The corresponding LED will flash given the values chosen.
Button: Choose the value of the parameter which is currently set
Write
Button: when all the parameters are set, press this button to permanently save the new parameters to the
ESC. “
Write
” LED will flash 3 times which indicates the setting is successfully written in.
●
Li-xx battery cells
4 LED compound indication
，
0-12 cells of Li-xx batteries
LED indicator
D C B A
Li-xx battery (cell)
○
○
○
○
0(system automatic detection)
○
○
○
●
1
○
○
●
○
2
○
○
●
●
3
○
●
○
○
4
○
●
○
●
5
○
●
●
○
6
○
●
●
●
7
●
○
○
○
8
●
○
○
●
9
●
○
●
○
10
●
○
●
●
11
●
●
○
○
12
●
Indicates that LED is on
4
