User registration
：
Follow in-app instructions to create an account, after registration is completed, enter the mailbox for account
activation
Account
login
and
register
Account
registration
mailbox
account
activation
Pairing with weather station device
1.
Login user account
2.
Make sure your phone is connected to a 2.4GHz Wi-Fi network. and Bluetooth function is turned on.
(WiFi weather station currently only support 2.4GHz Wi-Fi network during configuration,)
3.
Plug in weather station with AC/DC power, Press and hold “Wi-Fi” button for 3 seconds until “AP”
blinking on the device display.
If the device is first enabled, it will automatically enter AP mode
, and “AP”
blinks on the display.
4.
Back to APP and Confirm the city of your current location.
Make sure your phone’s location service are turned on and allowed for this App.
Make sure
that your current location city can be successfully located in the map. Some cities may fail to
locate because there is no corresponding success in the app. You can manually move the location or be
automatically positioned to a large administrative level city.
5.
Connection method please select
W003.
6.
After new device searching complete please find and select “
WeatherType
”.
7.
Select the correct Wi-Fi network SSID and Make sure Wi-Fi password you’re inputting is correct.
8.
Follow the in-app instructions to pair the weather station device.
When the notice of Device binding successful appears in the App. The weather station device will
automatically exit AP mode. If not please press “Wi-Fi” button 3 seconds to exit it.
9.
The device will connect to your home Wi-Fi network automatically in few minutes. Wi-Fi and signal
symbol and All weather data will be displayed after Wi-Fi is successfully connected.