background image

Year Standard Warranty

Our Standard warranty covers defects or failures in workmanship or materials in our air tools 2 years

from the date of purchase. EMAX will repair or replace; at their discretion any defective part or unit 

which proves to be defective. This warranty does not cover incidental/consequential damages and 

failures due to misuse, abuse or normal wear and tear.

Any modification, repair or repair attempts not authorized are not covered under this warranty.

Shipping for warranty claims are included in this warranty for the first 90 days.

*Limited Extended Lifetime Warranty

Our LIMITED EXTENDED LIFETIME WARRANTY is our no questions asked warranty. It covers

defects or failures in workmanship or materials in our air tools for the life of the tool. EMAX will

repair or replace; at their discretion any defective part or unit which proves to be defective. This

warranty does not cover incidental/consequential damages and failures due to misuse, abuse or

normal wear and tear (sanding pads and discs, chisels, tips, needs, nozzles, etc).

ANY MODIFICATION, REPAIR OR REPAIR ATTEMPTS NOT AUTHORIZED ARE NOT COVERED

UNDER THIS WARRANTY.
SHIPPING FOR WARRANTY CLAIMS ARE INCLUDED IN THIS WARRANTY FOR THE FIRST 90

DAYS.

3 SIMPLE STEPS TO QUALIFY FOR YOUR EXTENDED LIFETIME AIR TOOL WARRANTY:

1. Register your air tool purchase at www.emaxwarranty.com , be sure to have your

original receipt of purchase in hand for important information needed in your registry.

2. Write a review on the site where you purchased your air tool

3. Send us a screen shot or photograph of your review to

[email protected] to complete your extended lifetime warrantyregistration.

For warranty claims or more information call EMAX directly at: 1-866-294-4153

EMAX PHONE: 1-866-294-4153

Содержание EATDS60S1P









Отзывы: