background image

 

Babyhawk Race Pro 4 inch

                                           

 

emax-usa.com 

Notice:

 If you change to an illegal channel using SmartAudio, there will be no image 

transmitting from Babyhawk Race Pro 4 inch. To switch back to a legal channel, 
press the button on the vtx and follow the vtx menu guide shown below.  

CE and FCC unlicensed user chart 

 

Unlocked FCC  HAM licensed user chart 

 

* From the factory this video transmitter is designed to operate within CE and FCC 
unlicensed users specifications. To use the unlocked features of this VTX the user is 
required to have a HAM radio license or prior consent from the FCC. By purchasing 
this equipment, the user is agreeing that they understand these responsibilities and 
will operate the equipment legally. Emax cannot be held responsible for your actions 
if you purchase and/or use this product in violation of your government's regulations. 

Changing VTX setting via Betaflight OSD 

Babyhawk Race Pro 4 inch is equipped with SmartAudio and is already configured 
with stock settings. The SmartAudio line is operated on UART 6 TX. 

1. Power on Babyhawk Race Pro 4 inch, goggles, and controller. 

2. Follow the tips on screen to enter the main settings menu: THROTTLE MID+ YAW 
LEFT+ PITCH UP to enter OSD parameter adjustment menu. as shown in Figure 2. 

3. In the menu interface, switching PITCH up/down to choose menu option. Move the 
cursor to “FEATURES” and stir Roll stick right to enter next menu. Using PITCH stick 
to move cursor to “VTX SA”, as shown in Figure 3.Then pull ROLL stick right to enter 
VTX configuration menu, as shown in Figure 4. 

 

                  

 

 

Figure 1 

Figure 1 

Содержание BabyHawk R Pro 4 Inch













Отзывы: