P3 OVERVIEW
1. OVERVIEW
ICF series cartridge filter combines superior water filtration with ease of operation and corrosion-free
construction. With filtration ratings of 5,100~ 8,910 gallons (19,305 ~ 33,700 liters) per hour, they are designed for
continuous or intermittent operation, for installation above or below the pool waterline, for fresh or saltwater
swimming pools or spas. ICF series filters utilize multiple reusable, reinforced polyester filter cartridge elements to
provide a high degree of water clarity and long filter cycles with minimum care.
Do not operate the filter until you have read and understand clearly all the operating
instructions and warning messages for all equipment that is a part of the pool circulating
system. The following instructions are intended as a guide for initially operating the filter in a
general pool installation. Failure to follow all operating instructions and warning messages can
result in property damage or severe personal injur y or death.
To reduce the risk of injur y, do not permit children to use this product unless they are closely
super vised at all times.
Due to the potential risk that can be involved it is recommended that the
pressure test be kept to the minimum time required by the local code. Do
not allow people to work around the system when the circulation system is
under pressure test. Post appropriate warning signs and establish a barrier
around the pressurized equipment. If the equipment is located in an
equipment room, lock the door and post a warning sign.
Never attempt to adjust any closures or lids or attempt to remove or tighten bolts when the system is pressurized.
These actions can cause the closure to separate and could cause severe personal injur y or death if they were to
strike a person.
N e ve r e xc e e d t h e m a x i m u m o p e r a t i n g p re s s u re of t h e s y s te m
components. Exceeding these limits could result in a component failing
under pressure. This instantaneous release of energy can cause the
closure to separate and could cause severe personal injur y or death if they
were to strike a person.
HYPERTHERMIA
SPA water temperature excess 38°C (104°F) may be injurious to health.
Measure water temperature before entering SPA.
Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal
body temperature of 98.6 °F (37 °C). The symptoms of hyperthermia include drowsiness, lethargy, and an increase
in the internal temperature of the body.
7. SPARE PART LIST
QTY
QTY
Key No.
Part No.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
550178232
111040077
111040078
550178233
117038519
111040079
111000048
430138225
550058225
550188172
550188173
550188174
550188175
550188176
4109000749
E140402
550008229
550128230
430308158
430178159
111040071
430248177
Handle Air release valve
O-ring d14.3×2.5
O-ring d6×3.5
Air Release valve
Pressure gauge 60psi , plastic casing
O-ring d50×5
O-ring D76 x d65.6 x 5
Handle upper body
Nut for Handle
ICF230 upper body
ICF330 upper body
ICF430 upper body
ICF530 upper body
ICF680 upper body
Air release vent
Element holder upper
Element holder lower
Inlet adaptor
Union 2inch/2.5inch ANSI
Union Nut 2" 90
O-ring D77Xd62X8
Outer thread connector
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
SPARE PART LIST P12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
