emaux CL-01A, Краткое руководство пользователя

Страница: 6 / 10

For a correct installation, follow the recommendations
listed below:
3. Installation guide
• Follow the arrangement shown in 2.Facility
scheme
•
Once you have located the dispenser, make
sure that the length of the hoses allows to reach
the facility pipes.
•
Drill a 10mm hole in the filter outlet pipe. Remove
burrs and debris.
•
Next, present the gasket and place the saddle
clamp with the adaptor, as shown in the
following figure:
Go to Index
•
Tighten the whole assembly and make sure you
have connected the flexible hose to the saddle
fitting adaptor.
•
Repeat the same procedure for the outlet pipe, as
indicated in 2.Facility scheme
•
Once the two connections are fixed to the pipes,
connect the free ends of the hoses to the inlet
(E)
and outlet
(F)
of the dispenser.