P4 INSTALLATION
3. INSTALLATION
3.1 PLUMBING
Emaux FLEX series Diverter Valve
is designed for both Imperial
pipes (1½”, 2” and 2½”) and
metric pipes (GB50, GB63, and
GB75). Pipes slipped in are
required gluing to fix and to
connect to a bigger pipe to the
valve, coupler, 45 ̊ or 90 ̊ fittings
have to be used.
NOTE:
During gluing the pipe and valve, to avoid glue
going into the diverter, it is recommended to
turn the handle in the direction as shown in Fig. 4.
So that the diverter is away from ports. Make
sure that no glue enters the main valve body.
Fig. 4
3.2 FUNCTION AND APPLICATIONS
Function
Application
Knob
To lock handle and
the Dial.
Loosen knob to adjust handle and dial.
Lock Nut
To lock the Dial
After loosen knob, push the lock nut then turn the Dial.
Arrow on
Handle
To indicate the
diverter position.
Turn the handle to adjusting flow inside valve. Marking on
the dial is used as position reference for the arrow to point
to.
Dial
To set the handle
turntable range.
Rotate the Dial until hear a click sound.
Turn all power pumps OFF before doing any adjustment or maintenance to
the valve.
WARNING
Knob
Arrow
Dial
Diverter
Coupler
2” Pipe
(smaller pipe)
Lock Nut
2½” Pipe
(bigger pipe)
Fig. 3
