Identification of Controls
(Continued)
Main Unit (connectors)
1.POWER CORD:Main power input.
2.HEADPHONE:Connect the earphone.
3.RF:This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a
hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable.
4
.
VGA : This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to
the VGA Stereo input if you want sound out of VGA video source.
5.PC Audio :This connection port is for people who want to provide audio to the TV when using a PC or a DVI video
device. The sources use 3.5mm mini-jack audio cable.
6.AV:Video connects to devices that use composite video cables such as VCR or DVD player or Wii™. Connect
the yellow for video and the red / white for audio.
Audio output is shared with Component.
7.HDMI:HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite
set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This
port also can accept a HDCP video device for video
.
8.USB:USB connects to USB flash drives for playing music and picture. The USB port is also used for updating the
TV's firmware.
9.COAX:Connect the SPDIF receiver.
10.
Component
-This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue, and red for video, and then connect white
for left channel audio, and red for right channel audio.
Audio output is shared with AV.
C
o
a
x
Y
P
b
P
r
1
2
3
4
5
6
7
8
9
10
USB
HDMI
VGA
PC
Audio
Video
R
L
Headphone
RF
