EMAR DVA6 Series, Инструкция по установке и эксплуатации, Страница: 29 / 33

28 / 32
(1) Group need to manual operation, contact usually use at uncertain factor or linkage with third
party system under emergency
；
(2) Group operation not include relay output, while contact include relay output, it is convenience
to control third party to linkage
Note
：
Please click “Application” after modify
，
or the modify is not successful.
1.3.1.3.3. System group configuration
Click “SYSTEM CONFIGURATION” then “Group” as below
：
Description
：
1. “ID” is a system number
；
2. “NAME” this is name user, usually use a easy remember name so you can remember it easily.
Such as below
（
system default is “GROUP 01...
）
,Click the item then enter modify mode
（
most 12
character
） ，
press “Enter” to set next group
；
3. “WORK PARTITION” show zone list in current group, double click can add or delete sub item;
①
Left top of dialog box show current zone number
；
② Left part is current zone list, choose and add to the right means add the zone in current group,
you can double click corresponding zone or though “Shift” and “Ctrl” button to continuous choose or
discontinuous choose, also can add or delete though the middle operating button;
③
">" and "<" as a single zone operation, ">" indicates that add the system zone to the
current group, "<" is a opposite operation, delete selected zone from the current group;
○
4
"<<" and ">>" means deleting all zone and add all zone to the current group