5
/
11
Features:
Switching power technology digital power amplifier
Class-D PA power amplifier of minimum power consumption
Less rack space and less heat generation
Two channel power amplifier into 19” rack mount unit
Rated power output at 120W, 250W, 350W to 500W by two channels
Two channel separate speaker outputs 4-16
Ω
/100V
Balanced XLR input by phoenix connector for two channels
Each input with separate gain control.
Each channel with high-cut filter
Built-in auto standby feature to save power consumption
Separate channel indicators for protection, clip, input and output
Complete short circuit, overload, high temp, clip and DC protection
Wide AC input from 110V to 230V input
DC 24V battery input at order request with additional cost
Description:
The digital class-D power amplifier is of switching power technology,
which features of minimum power consumption and much higher
efficiency up to 85%, moreover it helps to save installation rack
space, generate less heat so as to extend its performance life span
as a result.
The digital class-D amplifiers are of rated power output at 120W,
250W, 350W & 500W by two channels, so it could be used as two
zone multiple sources public address system at minimum cost. The
versatile loudspeaker outputs of both high impedance 100V & low
impedance 4ohms enable it meet both PA fixed installation and Hi-fi
stereo sound installation jobs.
There are two balanced inputs by phoenix connector for each
channel with gain control. Two separate zone speaker outputs both
by 100V & 4-16ohms. The built-in two channel separate high-pass
filters could be enabled or disabled through the dip switch
pre-setting.
Automatic standby enable after no detection of signal input for one
minute, immediately wake up at sight of any input. Visual working
status indicators include protection, clip, input and output for easy
supervision. With complete short circuit, overload, high temp, clip
and DC protection.
Wide AC power supply from 115V to 230V, thus it support
worldwide sound system installation. DC24V battery input is
optional at request.
Introduction