STEP 1
1. Insert armrests to the seat
2. Be aware of the correct position of the
left and right armrests
3. Fasten the screws A x 6pcs
STEP 4:
1. Insert 5pcs of
casters into the
base, then
insert gaslift
into the
opening in the
base
2. Insert the
gaslift into the
corresponding
hole in the
mechanism
STEP 2:
1. Fasten mechanism to the seat
2. Tighten the screws B x 4pcs
3. Fasten backrest to the mechanism
4. Tighten the screws C x 4 pcs
STEP 3:
1. Fasten the plastic
cover for to
mechanism
2. Tighten the screws D
x 2pcs
User guide
Maintenance and attention
1. The chair can only be used by one
person at a time.
2. Do not use the chair as a stool or
ladder.
3.Do not use the chair unless all
parts are properly assembled.
4.Do not use the chair unless all
screws are properly tightened.
5. If the chair is damaged by
external influences, do not use it
without expert repair.
6. This is a mechanical product
subjects to user stress, it is
necessary to check the chair
regularly and possibly tighten the
screws.
For professional servis, please
contact us by phone +420 463 034
155 or by mail [email protected]
9. Screws
Assembly instructions - model LEX
Used parts
(Note: Some parts may be different than images)
1. Gaslift
2. Casters
3. Armrests
4. Asynchronous mechanism
5. Seat
6. Base
7. Backrest
Model LEX
A
M6x35
6pcs
Armrests
B
M6x20
4pcs
Mechanism
C
M6x25
4pcs
Backrest
D
4x16
2pcs
Plastic cover for
mechanism
1 pcs
IMBUS
